XYC 101 Reflow Oven and Wave Soldering Chain Cleaner 20L

Series: Industrial Cleaners

Specification: 20L

Model: XYC 101

Intended Use: This product is suitable for electronic manufacturing factories, reflow ovens, wave soldering equipment, cleaning rosin residue inside the oven to improve heating efficiency, and maintaining chains and rails. It is also suitable for cleaning stains on household kitchenware, barbecue ovens, stoves, and range hoods.

Turn off the equipment power before use.
Ensure oven temperature is below 30°C.
Spray the product directly onto the surface to be cleaned using a spray bottle.
For heavy carbon deposits, rosin, or rust, remove surface stains with tools before using this product.
After spraying, allow the product to dwell for 5-10 minutes, then wipe clean with a damp cloth.
Ensure the product is completely dry and evaporated before restarting the equipment.
Remove chains, lead screws and bearings that need to be cleaned and place them in a large container to soak for more than 12 hours or on an ultrasonic container (can be heated to 60 degrees).

Flammable aerosol. Pressurized container: may burst if heated.

May be fatal if swallowed and enters the airways. Harmful if in contact with skin. Causes skin irritation. May cause drowsiness or dizziness. Suspected of damaging fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure. No obvious harm to aquatic organisms.

Precautions:

Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
Pressurized container: Do not pierce or burn, even after use.
Use in a well-ventilated area.
Wear rubber gloves, eye protection, and a mask.
This product is only suitable for metal products, as corrosion may occur on other materials.

Inhalation: Use suitable respiratory protective equipment. If respiratory irritation, dizziness, nausea, or unconsciousness occurs, seek medical attention immediately. If breathing stops, assist ventilation with mechanical equipment or perform mouth-to-mouth resuscitation.
Skin Contact: Wash affected areas with soap and water. Remove contaminated clothing. Wash contaminated clothing before reuse.
Eye Contact: Rinse with water. If irritation occurs, seek medical assistance.
Ingestion: Seek immediate medical attention. Do not induce vomiting. Keep the person at rest and seek prompt medical care.

Store in a well-ventilated place. Keep the container tightly closed. Protect from sunlight. Do not expose to temperatures exceeding 45°C. Store locked up.